Electric tracked carrier for sale in the UKElma CR15 1.5 t Electric Tracked Carrier
The Elma CR15 is an electric tracked carrier with a 1.5 t capacity, a 775 mm width and 44 mm ground clearance. Compact and radio-controlled, it suits glazing, fit-out and refurbishment teams moving heavy materials through tight access. Its 380 kg unladen weight makes it the lightest of these three models.
1.5 tCarrier capacity
775 mmOverall width
44 mmGround clearance
Radio remoteElectric drive
Put it to workSmall footprint. Serious work.
Take the carrying out of fit-outs, refurbs and glazing work. The CR15 brings powered transport into restricted access spaces where moving everything by hand slows a team down.
Less carrying by hand.
Powered transport takes on repeated heavy moves, reducing the amount of manual carrying needed.
More time on the job.
Skilled staff can spend more of their day on the work that needs them, rather than shifting materials.
Ready when you are.
Owning a carrier can reduce repeated hire and delivery costs when it is used regularly.
Elma CR15 technical specifications| Carrier capacity | 1,500 kg |
|---|
| Overall width | 775 mm |
|---|
| Ground clearance | 44 mm |
|---|
| Overall length | 1,390 mm |
|---|
| Published machine weight | 380 kg |
|---|
| Track length × width | 876.5 × 180 mm |
|---|
| Maximum travel speed | 4 km/h |
|---|
| Motor power | 4.4 kW |
|---|
| Battery voltage | 48 V |
|---|
| Lithium battery options | 60 Ah / 120 Ah |
|---|
| Longitudinal / lateral gradient | 40° / 30°; load and operating conditions apply |
|---|
| Published protection rating | IP67 |
|---|
Manufacturer figures are shown for reference. Model compatibility, fittings, final configuration and working capacity should be confirmed with the supplier. Attachment ratings do not increase the base carrier limit.
Elma CR Series attachmentsOne carrier. More possibilities.
Explore the CR Series attachment range below. Model compatibility and the supplied configuration are subject to supplier confirmation.

Fixed platform
A flat deck for materials, equipment and secured loads.
- 3,000 kg component rating
- 165 × 74 cm deck
- 190 kg attachment weight
The platform component rating does not increase the base carrier limit.
Explore fixed platform

Rotating platform
Turn the platform through 180° to change the load orientation.
- 3,000 kg component rating
- 165 × 74 cm deck; 180° rotation
- 190 kg attachment weight
The platform component rating does not increase the base carrier limit.
Explore rotating platform

Glass transport kit
An inclined rack for transporting glass sheets and panels.
- 1,375 kg / 2,875 kg, configuration-dependent
- 199 × 76 × 140 cm; 10° inclination
- 125 kg attachment weight
Requires a fixed or rotating platform.
Explore glass transport kit

Forestry kit
Upright holders support timber and similar long materials on the deck.
- 1,450 kg / 3,000 kg, configuration-dependent
- 153 × 66 cm between holders; 66 cm holder height
- 50 kg attachment weight
Requires a fixed or rotating platform.
Explore forestry kit

Dumper kit
A tipping body for moving loose materials around outdoor projects.
- 1,300 kg published kit capacity
- 420-litre volume
- 220 kg attachment weight
Explore dumper kit

Dumper + bucket kit
A bucket for the dumper configuration, for handling loose material.
- 100 kg bucket capacity; 50 litres
- 10 cm digging depth; 161 cm lifting height
- 35 kg bucket weight
Bucket figures are separate from dumper capacity.
Explore dumper + bucket kit

Lift kit 1
A lifting platform for bringing supported loads to a working height.
- 990 kg published kit capacity
- 186 cm / 206 cm maximum elevation, configuration-dependent
- 290 kg attachment weight
Explore lift kit 1

Lift kit 2
A taller lifting platform with a lower rated capacity.
- 490 kg published kit capacity
- 305 cm / 325 cm maximum elevation, configuration-dependent
- 350 kg attachment weight
Explore lift kit 2
Full attachment reference table
Manufacturer figures are shown for reference. Model compatibility, fittings, final configuration and working capacity should be confirmed with the supplier. Attachment ratings do not increase the base carrier limit.
Explore the full attachment rangeCR Series equipmentPower, control & add-ons
Electric drive and radio control are part of the range. Other equipment depends on the supplied configuration.

Modular batteries
Independent lithium modules, with Elma listing charging within three hours. Capacity and charge time depend on the configuration.

Hydraulic quick couplers
Rear connections for compatible hydraulic attachments.

Dolly system
A range option for transporting heavy equipment. Compatibility and capacity depend on the full setup.

Attachment storage kit
A range option for removing and temporarily storing accessories.
An integrated battery heater is also listed as an option. Radio remote control is listed for all three models.
UK sales, delivery & supportWhat to expect when buying an Elma CR15.
Tracked Crawler connects UK commercial buyers directly with an authorised equipment supply partner for quotations, configuration advice and ongoing support.
Clear UK quotations
Quotes include machine pricing in GBP, selected 48 V lithium battery option, charger, chosen attachments, and UK mainland delivery arrangements.
Site access & demonstrations
Assess door widths, turning space and gradients. On-site demonstrations can be arranged with the supplier to verify suitability for your specific job.
Configured working capacity
Attachment component ratings do not increase base carrier capacity. The Elma CR15 has a 1.5 t maximum rating; attachment dimensions affect clear access needs.
UK warranty & spare parts
Backed by manufacturer warranty, UK spare parts stock and technical servicing support to minimise project downtime.
Manufacturer documentsKeep the details to hand.
Specifications, dimensions and attachment configurations from Elma, available here.
Quick answers
Frequently asked questions
How much can the Elma CR15 carry?
The Elma CR15 has a maximum carrier capacity of 1.5 t. The working capacity of a platform, rack or lift must be confirmed for the complete supplied configuration.
How wide is the Elma CR15?
The Elma CR15 has a published overall width of 775 mm. Check your actual opening and the full attachment dimensions before use.
What is the Elma CR15 ground clearance?
The Elma CR15 has 44 mm ground clearance. This is the space beneath the undercarriage, not the platform height.
Is the Elma CR15 electric and remote-controlled?
The Elma CR15 uses electric drive, 48 V lithium batteries and radio remote control.
What attachment options can I ask about?
The CR Series range includes platforms, glass and forestry kits, dumper and bucket configurations, and lift kits. Ask the supplier to confirm compatibility, fittings and working capacity for your chosen model.